Main Features:
- Nano Propeller Coating (NPC) coating an innovative smooth surface, high-density hybrid cross-link structure, presenting superior protection to reject living organisms such as barnacles, marine vegetation, various pollutants thereby drastically reduce their ability to adhere and grow to the coated surface on
- Can be used in cargo ships, containers ships, yachts, boats, any sea-transportation to protect propellers.
- Provides excellent hydrophobic and anti-corrosive protection, fuel saving, more power, less cost maintenance, keep the engine parts work more smoothly thereby increasing his life span. 
- Tremendous fuel savings and saving maintenance costs because of a clean propeller
- Super durability 
- Easy to clean 
- Certified and approved by NACE - MPI USA, excellent resistance on chemical (passed test 5000 hours spraying of sea water in cycles)
- The coating is not affected by sunlight radiation, it engages with photocatalyst-coating, atmospheric oxidation and wear

Significant Advantages and Characteristics:
- NPC reduces the friction and increasing the speed by 56%
- Does not allow any flora (marine vegetation) to develop
- VOC level (measured according to EPA-24) : < 10 g/ l. very low and lower that required by American standards
- Drying /hardening mechanism: natural, no external means
- Gloss level: 90%, very high
- Flash point: Part A: 252 C; Part B: 96 C

Steps to Use: 
Step 1. Thoroughly remove the pollutants on the surface of the existing propeller, wait the surface completely dries out

Step 2. Mix, separately, part A and part B for 1 minute

Step 3. Pour Part B into Part A and thoroughly mix for another two minutes. Let the mixture rest for 10 minutes until the air bubbles leave the mixture. The right time to get started is when the mixture is clear and complete without bubbles.

Step 4. Apply thickness of 80-100 microns in two layers (180- 200 microns) using brush/ roller / HLVP. Second layer applying 45-90 minutes after the first layer is stable and still slightly tacky in accordance with the ambient temperature. Do not let the previous layer to cure, as it will not allow applying the next layer.

Step 5. During the application, it is essential to continue slowly mixing the mixture every few minutes.

Step 6. Do not apply in rain and expected to use after 72 hours

Packing and Dimensions:
- 1 Gallon (A+B) 3.8L 

Storage:
- Temperature from 5-35 Degree Celsius (41 – 95F), stored in cooler and ventilated places

主要特點：
- 納米螺旋槳塗層（NPC）塗層的光滑表面，高密度混合交叉連桿結構，呈現出優異的保護，拒絕生物體，如藤壺，海洋植被，各種污染物，從而大大降低了它們的粘附能力和成長到塗層表面上
- 可用於貨運船舶，集裝箱船，遊艇，船，任何螺旋槳
- 提供出色的疏水性和防腐蝕保護，節省燃料，而且維修成本較少一般維修少，保持螺旋槳零件的工作更加順暢，大大了螺旋槳的壽命
- 節省巨大的燃料和維修成本
- 超級耐用性
- 易於清潔
- 經 NACE - MPI USA 認證和批准，極為耐用（通過測試5000小時噴灑海水）
- 塗層不受陽光輻射的影響，與光觸媒塗層結合

優勢和特點：
- NPC 降低了摩擦並將速度提高56％
- 不允許任何植物植被（海洋植被）依附生長
- VOC 水平（根據EPA-24測量）：<10g / l，非常低，符合美國標準要求
- 硬化程度：自然硬化
- 光澤度：高達 90％，令表面更為閃耀
- 閃點：第A部分：252 c; 第B部分：96 C.

使用的步驟：
步驟 1. 徹底清除現有螺旋槳表面的污染物，讓表面完全乾透

步驟 2. 分別混合部分 A 和 B 部分 各 1 分鐘

步驟 3. 將 B 部分倒入 A 部分，並徹底混合兩分鐘。 讓混合物靜置 10 分鐘，直至氣泡離開塗層物料，靜置塗層物料到清晰並且沒有泡沫方可塗上要應用表面

步驟 4. 使用刷子/滾子/ HLVP 然後塗上兩層（180-200 微米 ）厚度為 80-100 微米。 在 45-90分鐘，再塗上第二層（請在溫和的溫度上）。在上一層硬化時塗上新的一層

步驟 5. 在塗層過程中必須每隔幾分鐘繼續把塗層物料融合，以免物料硬化

步驟 6. 請不要在雨中進行塗層，預計在 72 小時後可以測試

包裝和尺寸：
- 1加侖（A + B）3.8L

儲存：
- 請儲存在溫度 5-35攝氏度（41-95F），儲存在通風的地方